Fit tester 3000 ce manual

TSI Fit Test Adapter Kit Part # Notes TSI Refill Kit Part # Manufacturer Adapter E Series CE Aproved E, E, E Glendale Protective Technologies Fit Test Adapters Millennium , Millennium , Spraymate www.doorway.ru FPS DHR series (SCBA), Panorama Nova, M, Futura, CDR The OHD Fit Tester provides a direct measure of leakage by creating a negative pressure inside the mask and measuring the pressure difference inside and outside the mask. The QUANTITATIVE fit test procedure utilizes the 5-step CNP REDON Respirator Fit Test Protocol with the OHD Fit Tester This testing measures face seal leaking. The OHD Fit Tester is the ONLY device that can check its calibration in the field! This gives you an extra measure of confidence as you protect your employees. Remember, OHD Fit Tester puts the pressure on your respirator not on you! We do not use any special hoods or spray any "particles" around the area.

The AV HT uses SureSeal technology for enhanced comfort and fit, and holds NIOSH when used with a wide range of 3M NIOSH respirators. The 3M Scott AV HT Facepiece is approved for use with the latest Air-Pak X3 Pro SCBA, compliant to the NFPA , Edition standard, and is backward compatible and certified for use with all Air-Pak. Here's how it works during a fit test, the respirator inlets are capped with test adapters, and the inhalation valves are removed from the mask. We follow OSHA fit testing protocol using the latest in fit testing technology including: Quantitative Fit Testing (OHD Fit Tester) Irritant Smoke (Stannic chloride) Qualitative Fit Testing. N99 Large Diameter Screw-on Half-face N/A N/A Fit test using respirator , RD40 (40mm threaded) Full-face CEN Opti-fit, , Classic, 20/20 PAPR or SCBA with Mask Mounted Regulators Full-face and Opti-fit, , , Classic, 20/20, Mk-II PAPR or SCBA with Belt Mounted.

The continuous test starts when you hear a long beep. The Tester connects the test supply, makes the first test, and shows the first result on the display. Then. the desired heating or cooling rates, in °C/sec, between each specified merchantability, fitness for purpose or otherwise of the unit or components. The calibration gas flow housing (S3KCAL) is used to apply calibration test gas to the sensor. It push fits onto the bottom of the sensor and can be fitted.